Celebrating Over 60 Years...

As the World Leader in Tool Systems & Technology for the
Aerospace, Military and Telecommunications Industries.

 

Products


M39029 Connector & Contact Cross Reference

EU RoHS Compliance
FAR Compliance

Have questions about our products? Email us at dmc@dmctools.com or call us at 407-855-6161.

PDF Catalogs

Aircraft Tool Kits
Beta® Backshell
Connector Tooling Guide
GSA-SCIT
Safe-T-Cable®
Tensile Test Systems

You will need Adobe Acrobat Reader to view our PDF Catalogs. If you do not have it, click the image below to download your free copy.

abode reader

If you would like to receive a copy of our catalog on CD or in print, please send an email request to: catalog@dmctools.com. Be sure to include your name, company name and complete address and any particular requests or needs that you may have.


ABOUT SSL CERTIFICATES
 

Safe-T-Cable® Tools & Accessories

 

It’s a Matter of Choice…

Over 50 years of success in the design, production, and support of tooling for high-reliability applications in the aircraft and aerospace industry is the reason DMC was included in the development team for Safe-T-Cable®. The Tooling, which was initially designed to meet the challenges of Safe-T-Cable® installation, has evolved into a product line that is flexible enough to meet the users’ exact needs. It’s your choice as to which model and accessories to specify, but always with the understanding that interchangeability, adjustability, and overall reliability was the basis of each application tool series.

Adjustable Tension Hand Tool Series

The most popular hand operated application tool for Safe-T-Cable® is the SCTR Series Adjustable Tension Tool.

This tool series features a rotary tension mechanism which can be adjusted to precise cable tension requirements. This is a necessary control feature and very popular with all users. The tension will repeat at the setting which has been selected for reliable Safe-T-Cable® installations. Like all DMC Safe-T-Cable tools, this tool series features replaceable noses of various lengths

DMC PART NUMBER
CABLE DIAMETER
NOSE LENGTH
SCTR203 .022 3 Inches
SCTR207 .022 7 Inches
SCTR323 .032 3 Inches
SCTR327 .032 7 Inches
SCTR403 .040 3 Inches
SCTR407 .040 7 Inches

 

Pre-Set Tension Hand Tool Series

In some factories where control of tool adjustments are not possible, where the skill level is minimal, or appli­cations where a single-handed operation of the tool is desirable, the SCT Series Application Tool may be the best choice. All tools in this series feature a tension mechanism, which allows ­single-handed use of the tool (after the cable is threaded through and into the tool). Multiple actuations of the tool handle will draw the cable into the tool until all slack is removed from the cable.

When the tool senses the correct tension (pre-set at the ­factory), it will shift into the crimp-cut mode, and complete the installation of the Safe-T-Cable® on the next closure of the handle. It's as simple as that.

DMC PART NUMBER
CABLE DIAMETER
NOSE LENGTH
SCT203 .022 3 Inches
SCT207 .022 7 Inches
SCT323 .032 3 Inches
SCT327 .032 7 Inches
SCT403 .040 3 Inches
SCT407 .040 7 Inches

 

Pneumatic Application Tool Series

When ergonomics and production demands are critical issues, the DMC SCTPR and SCTP Series Pneumatic Application Tool are a must. Safe-T-Cable® is threaded through the fasteners, into the ferrule, and into the tool in the same fashion as the manual tools, but the push of a button is all that is necessary to complete the termination. The tool automatically applies tension (adjustable), crimps and cuts flush in one actuation of the trigger. These tools operate on standard shop air pressure, and may be suspended from a load balancer for an even greater improvement in ergonomics.

DMC PART NUMBER
CABLE DIAMETER
NOSE LENGTH
ADJUSTABLE
PRE-SET
SCTPR203 SCTP203 .022 3 Inches
SCTPR207 SCTP207 .022 7 Inches
SCTPR323 SCTP323 .032 3 Inches
SCTPR327 SCTP327 .032 7 Inches
SCTPR403 SCTP403 .040 3 Inches
SCTPR407 SCTP407 .040 7 Inches

 

SCTE323Battery Powered Tool Series

The DMC SCTE Series Battery Powered Safe-T-Cable® tool is an ergonomic alternative to the other Safe-T-Cable® Application Tools where a portable tool, without a hose or cord is required. The self contained hydraulic crimp system is reliable and the tool accommodates the same changeable noses and other accessories that are interchangeable with other DMC Safe-T-Cable® Application Tools.

DMC PART NUMBER
CABLE DIAMETER
NOSE LENGTH
SCTE625B .062 5 Inches
SCTE629B .062 9 Inches

 


Replacement Noses
DMC PART NUMBER
CABLE DIAMETER
NOSE LENGTH
SCTN20-3 .022 3 Inches
SCTN20-5 .022 5 Inches
SCTN20-7 .022 7 Inches
SCTN32-3 .032 3 Inches
SCTN32-5 .032 5 Inches
SCTN32-7 .032 7 Inches
SCTN40-3 .040 3 Inches
SCTN40-5 .040 5 Inches
SCTN40-7 .040 7 Inches

 

Special Tools and Accessories

DMC extends the capabilities of the Safe-T-Cable® Product Line by making available the following accessories and tools:
SCT32084 Spanner Tool
is for adjusting all Safe-T-Cable® Application Tools (one spanner is supplied with each new tool).
SCT32059SA Nose Extender
adds two inches in length. Can be used with any tool/nose combination.
SCTR20TW-SA
( .022 Dia.)		 Replacement Tension Assembly
For use with SCTR Series tools only.
SCTR32TW-SA
( .032 Dia.)
SCTR40TW-SA 
( .040 Dia.)
45-6N Cutter/Gripper
for .022, .032 and .040 Safe-T-Cable® and Lockwire